Skip to main content

Changelog

Follow new updates and improvements to Coreloops.

Coreloops Platform Update – October 2026

v1.26.4.1 - 10/2026

This update is mostly about timesheets. Operatives get a simpler My Timesheets screen, admins get more control over which projects and cost codes each operative can use, timesheets gain a Reviewed status, and documents generated from timesheets are more accurate. We’ve also added a dedicated CIS Statement document type, the option to raise purchase invoices against a contact, and an easier way to see which documents are left out of your cost reports.

Timesheets

  • A Reviewed status for timesheets – Timesheets now have a Reviewed status between Pending and Approved, so you can show that someone has checked a timesheet before it's signed off.

  • Set which projects and cost codes each operative can use – Admins can now choose an operative's allowed projects and cost codes from the Operatives section of Team settings. Operatives will only see those options when filling in their week, and if nothing has been set up yet, they'll see "No projects available" rather than an empty list.

  • Contact defaults come from their allowed lists – A contact's default project and cost code can now only be picked from the projects and cost codes they're allowed to use, and those defaults are filled in automatically on every new timesheet.

  • Add a note to the whole week – Operatives can now leave an optional comment on their whole timesheet, next to Submit week. Admins and approvers see it when they review the timesheet, separately from the description on each day.

  • A simpler day entry screen on My Timesheets – Filling in a day now takes fewer steps.

    • The break field has gone (breaks still come from your timesheet rules, so totals don't change),

    • "Job details" is now "Description" and is prefilled with the day name, and

    • "Done" is now "Add Project" so it's clear it adds another project to the same day.

    • Travel time is entered in hours and is hidden when it isn't switched on for your company.

    • On mobile, "Add timesheet" now sits under the My Timesheets heading, and refreshing the page keeps you on the week you were looking at.

  • Admins can fill in their own timesheets too – If an Admin is linked to a directory contact, they can now open My Timesheets to record their own hours, and still move back to All Timesheets without being bounced around.

  • Faster timesheet admin – On the Timesheets page, the Approve button has been replaced with a status change button, and the status filters now show a count next to each status. You can add the same line item (for example, Monday) to several people's timesheets in one go, and open a contact's rates straight from the three-dot menu. The "Assigned to" list on timesheets and documents now only shows team members, not operatives.

  • Choose a default document type for each contact – Set whether a contact's timesheets generate a CIS statement or a VAT invoice by default, so you don't have to pick each time.

  • See the document a timesheet created – Once a document has been generated from a timesheet, the timesheet now shows it, and the "Generate document" button becomes "View document".

  • CIS shown on VAT invoices from timesheets – VAT invoices generated from a timesheet now show the CIS percentage and the CIS deduction.

Documents

  • See and manage what's excluded from cost reports – The Documents table now shows which documents are excluded from your cost reports, and you can exclude a document manually if it shouldn't count towards your costs.

  • Multi-invoice PDFs are split into separate invoices – When a supplier sends a single PDF containing several invoices, Coreloops AI now recognises each one and splits it into its own document, rather than treating the whole file as one invoice. Each invoice can then be reviewed, approved and synced on its own.

Accounting & Tax Sync

  • CIS statements are now their own document type – CIS statements generated from timesheets are now a separate document type, rather than a variation of an invoice, and sync to your accounting software as a bill.

  • Raise purchase invoices against a contact – The Supplier field on a purchase invoice now also lists contacts who don't have a supplier record, which is useful for workers you pay directly. Coreloops sets up a matching supplier for you, and the invoice syncs to Xero, QuickBooks or Sage 50 as normal. If that supplier isn't in your accounting software yet, you'll be asked to sync it as a supplier first.

Bugs fixed

  • Fixed documents generated from a timesheet using worked hours instead of paid hours, and not picking up the timesheet's project

  • Fixed the "Sync Required" badge showing on documents that are still pending

  • Fixed invoices with a negative line, such as a retention deduction, failing to sync to Xero and QuickBooks

  • Fixed timesheet line items sometimes showing out-of-date rows

  • The rate now shows on payment application line items

Coreloops Platform Update September 26

v1.26.3.3 - 09/2026

This month's update is all about timesheets. Your team can now fill in their own timesheets, log more than one project in a day, and turn a timesheet straight into a CIS statement or VAT invoice. We've also added AI-built payment application templates, a safer "void" option for documents, and branded outbound emails.

Documents

  • Void documents instead of deleting them – Removing a document now voids it rather than deleting it permanently, so nothing is lost. Voided documents are hidden from your document lists, search and cost reports by default, and you can show them again with a filter. If the document has already synced to Xero, QuickBooks or Sage 50, you'll be prompted to void it there too.

  • Your logo on outbound document emails – Emails sent from Coreloops, such as invoices, now carry your own company logo instead of Coreloops branding. They use the logo you've already uploaded in Settings, so there's nothing new to set up.

  • Dismiss the failed-documents banner – The "documents could not be processed" banner on the Cost Report dashboard can now be closed once you've dealt with it, and it stays closed. It clears automatically once those documents are re-uploaded or entered manually, and only comes back if a new batch fails.

  • Purchase orders fill in the supplier and delivery address for you – When you create a PO from a quote, the supplier is carried over from the quote, and the delivery address is filled in from the project's site address. POs created from the all-projects view also pick up the site address once you assign a project. Both fields can still be edited.

  • Match invoices to any purchase order – Invoices can now be matched to purchase orders, whatever their status (Draft, Pending or Approved), not just approved ones. Matching no longer has to wait for a PO to be signed off.

  • Clearer results when approving invoices in bulk – If some invoices in a bulk approval can't be approved, Coreloops now tells you exactly which ones failed and why (for example, a missing supplier), and still approves the rest.

  • Pick dates from a calendar in document filters – When you set a custom range on the Issue date or Due date filter, you can now pick dates from a calendar as well as typing them in.

Accounting & Tax Sync

  • QuickBooks payment terms and VAT numbers sync both ways – Sales and purchase payment terms and VAT registration numbers on your clients, suppliers and contacts now stay in step between Coreloops and QuickBooks. A blank value in QuickBooks won't overwrite details you've entered in Coreloops, and any sync problems are shown to you rather than failing silently.

  • Easier Sage 50 reconnection – If your Sage 50 connection needs signing in again, you're now prompted to re-authenticate directly from the document, so syncing can carry on.

  • CIS subcontractor details sync with Sage 50 – For CIS-registered suppliers, CIS details now sync directly between Coreloops and Sage 50: CIS status and rate, company type, verification number and date, UTR, company number and NI number. You no longer need to keep them up to date in both places.

  • Safer Xero bill syncing – Before a bill is sent to Xero, Coreloops now checks that its line totals add up to the subtotal. If they don't, it stops the sync and shows a clear error, so the wrong amount never reaches your accounts.

Timesheets

  • Submit your own timesheets with My Timesheets – A new My Timesheets page in the navigation lets team members/operatives fill in their own week. Pick a day, add a project, and enter start and end times or total hours, then save a draft or submit it for approval. It works on mobile too.

  • Invite operatives from Team Settings – A new Operatives section in Settings > Team, alongside Team Members and My Teams, lets admins invite an operative with just their name and email. In the same step, you link them to their directory contact. From here you can also search, edit and remove operatives, or change which contact they're linked to.

  • Log multiple projects in a single day – Operatives can now add more than one project to the same day, each with its own hours, cost code and compensation event. This makes it easy to split a day across sites.

  • Link team members to directory contacts – Admins can now link a platform user to their directory contact from Settings > Team, using the "Assign Contact" action next to each team member. Timesheets that person submits are then recorded against the right contact.

  • Generate a CIS statement or VAT invoice from a timesheet – Turn a timesheet into a CIS statement or a standard VAT invoice in one step. It syncs to Xero, QuickBooks or Sage 50 as an attachment, so your cost report isn't counted twice. You can switch this sync on or off for each accounting connection.

Payment Applications & BOQs

  • Create payment application templates with AI – In the Template Builder, choose "Create with AI" and upload a sample payment application (Excel, CSV or PDF). Coreloops builds a draft template from it for you to review, adjust and save.

  • Add cover pages and other non-financial pages to templates – Payment application templates in the Template Builder can now include text pages, such as a cover page or notes. You can reorder, rename or remove them, and they appear in the app and in exports without affecting any totals.

  • Choose which section a variation is published to – When you publish a variation, you can now pick the BOQ section it goes into, or create a new section right from the publish window. If you don't pick one, it goes into "Variations".

  • Retention shown on invoices from payment applications – Invoices generated from a payment application now show the period certified amount and a separate "Less: Retention" line, so the net amount due is clear. Both lines are included in exports.

  • Multiple cost codes or tags per line in BOQ imports – When importing a BOQ, you can now put several cost codes or tags in one cell, separated by commas (for example, "Groundworks, Drainage"). Each one is assigned to the line item, and any that don't exist yet go through the usual create-new step.

  • AI classification moved into a menu – "Auto-classify with AI" now sits in a sub-menu on the BOQ toolbar instead of being a standalone button. Choosing which items to classify and reviewing the suggestions have both been redesigned to be clearer.

Reports

  • Supplier spend metrics in the Resource Report – The Resource Report now has new metrics you can turn on, grouped by supplier, so you can compare committed spend against actual spend. They are PO subtotal, actual cost subtotal, VAT and gross total, CIS, and PO and invoice counts. Your column choices are remembered, and the new metrics are included in exports.

Bugs fixed

  • Fixed recurring invoices from the same supplier for the same amount being wrongly flagged as duplicates. Duplicate detection now also checks the invoice number and date

  • Fixed bulk-assigning a project, cost code or tag to a document not updating its line items

  • Fixed some bills with labour, materials and CIS syncing to Xero with the wrong materials amount

  • Fixed the QuickBooks payment terms dropdown hiding one of two similar terms (e.g. "Net 7" and "7 days") and not saving your choice

  • Fixed bulk-approving a large batch of invoices failing because of Xero's request limits

  • Fixed a retried sync occasionally creating a duplicate invoice in Xero, QuickBooks or Sage 50

  • Fixed changes made while a sync was running sometimes being skipped by the next sync

  • Fixed errors when deleting a synced payment not showing the real reason

Customer Support Process - Coreloops

We have loved listening to your feedback on the Coreloops product, and as part of our ongoing improvements to Customer Support, we are launching a few new tools for you to reach out to us and share more valuable feedback about the platform.

How to reach us: 

Email 

For questions, support with onboarding and urgent bug reports, please email us on support@coreloops.ai

In-app chat 

We’ll aim to respond to all emails or chat messages within 4 business hours, during the hours of 9 am - 5 pm on Monday - Friday. 

Phone 

For urgent requests, you can reach us via phone on +447427 931121. 

Feedback Board:

Coreloops' new feedback form is live. If there is something that you want from the product, this is the new place for you to post it. From feedback to bugs to new feature requests, this new board lets you share your thoughts and see what other customers are asking for. 

How to find the feedback board

You can find the feedback board by clicking on the floating blue button on the bottom right of the platform. On the home tab of the widget, you will see a “Featureboard: Suggestions” card. Clicking this will take you to the page.

You can also go to https://community.coreloops.ai/ to see the board.

Adding to the board

The easiest way to add a post is by pressing the Create a New Post button. You will see the following screen. Here you are able to add a title, a description of the bug or new feature and add an image to help us understand what the issue is.

At the very top, next to your user image, you can see which board you are posting to. Here you can identify what the post is about, whether it's a new feature request, a bug you are looking to report or general feedback.

When adding a post, any time there is a change in either status or if an ETA is added, you will be updated via email.

Upvotes and Comments

In the feedback board, you are not only able to post your own requests for new features or report a bug. But as you browse the board and read the posts left by others, if there is a post you agree with, then you are able to upvote others’ posts and comment on them. To upvote, you can press the up arrow found next to any post. 


When you upvote a post, you will automatically be notified about any changes that have been made to that post.

You can also click on the post to expand and get more information about it. When looking at the expanded view of posts on the board, you can see the status of the post, any similar posts, all comments and the latest activity on that post. 

 Sorting and Filtering

When opening the feedback board, you will see the posts which have been upvoted the most, but you are able to change the sorting. The New button will show you all the most recent posts on the board, whilst Trending will show you the posts that have been receiving the most upvotes recently. 

Changelog

Wanting to know what has been changing in the platform in recent months and weeks? Reintroducing the Coreloops changelog. Whilst some of you may already be familiar with the changelogs, we have decided to highlight it again to everyone. 

The changelog is a will highlight all the changes made to the platform, with posts coming for each change. To not miss the updates, subscribe to receive them via email every time we post. 

Earlier updates